The filter element is not only maintained but also often sterilized.

来源：Yuanbang Filter Technology (Langfang) Limited 发布时间：2018-11-19 浏览次数：

Hydraulic filter element needs a lot of daily operation to maintain, said these, we usually think of the cleaning and replacement of hydraulic filter element, but there is a very frequent operation, that is, disinfection, what is the specific?

Hydraulic filter element should be disinfected by steam before use. The disinfection can be divided into two types: steam disinfection cabinet disinfection and online disinfection.

1. Disinfection in the disinfection cabinet: remove the hydraulic filter element from the plastic bag and place it in the disinfection cabinet at 121 C for half an hour.

2. On-line disinfection: install the hydraulic filter element in the filter according to the correct method (0.5mm interval between the fixed plate and the hydraulic filter element) and steam for half an hour.

The filters used for sterilization should be sterilized and disinfected in the production line in order to avoid external pollution. Steam sterilization on site should strictly control the steam pressure and pressure difference, and avoid damaging the hydraulic filter element due to excessive steam pressure and pressure difference.

关键词：Hydraulic,filter

本文地址：http://www.yuanbanglvye.com/news/2_2322.html

上一篇：Why is the hydraulic filter deformed?

下一篇：The hydraulic filter element is an impurity element in industrial products.

The filter element is not only maintained but also often sterilized.

推荐资讯